Collecting trace information -

Collecting trace information

Tracing an entire application in PowerBuilder
Using a window
Collecting trace information using PowerScript functions

There are three ways to collect trace information. You can use:

The Profiling tab on the System Options dialog box
A window similar to the Profiling tab
Trace objects and functions

Use the Profiling tab if you want to trace an entire application run in the development environment. For more information, see Tracing an entire application in PowerBuilder.

Use a window or trace objects and functions if you want to create a trace file for selected parts of the application or the entire application, either in the development environment or when running an executable file. See Using a window and Collecting trace information using PowerScript functions.

Collection time

The timer values in the trace file exclude the time taken to collect the trace data. Because an application can be idle (while displaying a MessageBox, for example), percentage metrics are most meaningful when you control tracing programmatically, which can help minimize idle time. Percentages are less meaningful when you create a trace file for a complete application.

Whichever method you use, you can specify:

The name and location of the trace file and optional labels for blocks of trace data
The kind of timer used in the trace file
The activities you want recorded in the trace file

Trace file names and labels

The default name of the trace file is the name of the application with the extension PBP. The trace file is saved in the directory where the PBL or executable file resides and overwrites any existing file of the same name. If you run several different tests on the same application, you should change the trace file name for each test.

You can also associate a label with the trace data. If you are tracing several different parts of an application in a single test run, you can associate a different label with the trace data (the trace block) for each part of the application.

Timer kinds

There are three kinds of timer: clock, process, and thread. If your analysis does not require timing information, you can omit timing information from the trace file to improve performance.

If you do not specify a timer kind, the time at which each activity begins and ends is recorded using the clock timer, which measures an absolute time with reference to an external activity, such as the computer's start-up time. The clock timer measures time in microseconds. Depending on the speed of your computer's central processing unit, the clock timer can offer a resolution of less than one microsecond. A timer's resolution is the smallest unit of time the timer can measure.

You can also use process or thread timers, which measure time in microseconds with reference to when the process or thread being executed started. You should always use the thread timer for distributed applications. Both process and thread timers exclude the time taken by any other running processes or threads so that they give you a more accurate measurement of how long the process or thread is taking to execute, but both have a lower resolution than the clock timer.

Trace activities

You can choose to record in the trace file the time at which any of the following activities occurs. If you are using the System Options dialog box or a window, you select the check boxes for the activities you want. If you are using PowerScript functions to collect trace information, you use the TraceActivity enumerated type to identify the activity.

Trace Activities check box	What is recorded	TraceActivity value
Routine Entry/Exit	Routine entry or exit	ActRoutine!
Routine Line Hits	Execution of any line in any routine	ActLine!
Embedded SQL	Use of an embedded SQL verb	ActESQL!
Object Creation/Destruction	Object creation or destruction	ActObjectCreate!, ActObjectDestroy!
User Defined Activities	A user-defined activity that records an informational message	ActUser!
System Errors	A system error or warning	ActError!
Garbage Collection	Garbage collection	ActGarbageCollect!
Not available	Routine entry and exit, embedded SQL verbs, object creation and destruction, and garbage collection	ActProfile!
Not available	All except ActLine!	ActTrace!

When you begin and end tracing, an activity of type ActBegin! is automatically recorded in the trace file. User-defined activities, which you use to log informational messages to the trace file, are the only trace activities enabled by default.

Tracing an entire application in PowerBuilder

Use the Profiling tab on the System Options dialog box if you want to collect trace data for an entire application run in the PowerBuilder development environment.

To trace an entire application in PowerBuilder

Select Tools>System Options from the PowerBar and select the Profiling tab.
Specify a name for the trace file, select the trace options you want, and click OK.

When you run the application, the activities you selected are logged in the trace file.

Using a window

You can create a window that is similar to the Profiling tab on the System Options dialog box and add it to any application that is under development, so that you can start and stop tracing when testing specific actions.

The w_profiler window is available in the PB Code Profiler sample in the PowerBuilder Code Samples at https://www.appeon.com/developers/library/code-samples-for-pb. This sample also shows the code used to create the profiling tools described in Analyzing trace information using profiling tools.

The w_profiler window lets you specify a trace file name, label, and timer kind, as well as which activities you want to trace:

The following instance variables are defined for the window:

TimerKind itk_kind
string is_title = 'Trace Options '
string is_starttext

The open event for the window sets some defaults:

application lapp_current
lapp_current = getapplication()
itk_kind = Clock!
is_starttext = cb_startstop.text
sle_filename.text = classname(lapp_current)+'.pbp'

The following code shows the script for the Clicked event of the Start Trace button. The text for the button is set to Start Trace in the painter. When the user clicks Start Trace, the button label changes to Stop Trace. The Clicked event script checks the text on the button before either starting or stopping tracing. This script uses the functions described in Collecting trace information using PowerScript functions:

// instance variables:
// errorreturn le_errorreturn
integer li_key

// Check that the button label is Start Trace
// and a trace file name has been entered
if this.text = is_starttext then

   if len(trim(sle_filename.text)) = 0 then
       messagebox(parent.title, &
         'Trace file name is required',information!)
       sle_filename.setfocus()
       return
   end if

   // If Prompt for overwrite is checked and the
   // file exists, pop up a response window
   if cbx_prompt.checked and &
      fileexists(sle_filename.text) then
      li_key = messagebox(parent.title, &
         'OK to overwrite '+sle_filename.text, &
         question!,okcancel!,1)
      if li_key = 2 then return
   end if
      
   // Open the trace file
   TraceOpen( sle_filename.text, itk_kind )
   
   // Enable tracing for checked activities
   // For each activity, check for errors and close
   // the trace file if an error occurs
   if cbx_embeddedSQL.checked then 
      le_errorreturn = TraceEnableActivity( ActESQL! )
      if le_errorreturn <> Success! then
         of_errmsg(le_errorreturn, &
            'TraceEnableActivity( ActESQL! )')
          le_errorreturn = Traceclose()
         if le_errorreturn <> Success! then
            of_errmsg(le_errorreturn,'TraceClose')
         end if
         return
      end if
   end if

   if cbx_routineentry.checked then 
      le_errorreturn =TraceEnableActivity(ActRoutine!)
      if le_errorreturn <> Success! then
         of_errmsg(le_errorreturn, &
            'TraceEnableActivity( ActRoutine! )')
         Traceclose()
         if le_errorreturn <> Success! then
            of_errmsg(le_errorreturn,'TraceClose')
         end if
         return
      end if
   end if

   if cbx_userdefined.checked then 
      le_errorreturn = TraceEnableActivity( ActUser! )
      if le_errorreturn <> Success! then
         of_errmsg(le_errorreturn, &
            'TraceEnableActivity( ActUser! )')
         Traceclose()
         if le_errorreturn <> Success! then
            of_errmsg(le_errorreturn,'TraceClose')
         end if
         return
      end if
   end if

   if cbx_systemerrors.checked then 
      le_errorreturn = TraceEnableActivity(ActError! )
      if le_errorreturn <> Success! then
         of_errmsg(le_errorreturn, &
            'TraceEnableActivity( ActError! )')
         Traceclose()
         if le_errorreturn <> Success! then
            of_errmsg(le_errorreturn,'TraceClose')
         end if
         return
      end if
   end if

   if cbx_routineline.checked then 
      le_errorreturn = TraceEnableActivity( ActLine! )
      if le_errorreturn <> Success! then
         of_errmsg(le_errorreturn, &
            ' TraceEnableActivity( ActLine! )')
         Traceclose()
         if le_errorreturn <> Success! then
            of_errmsg(le_errorreturn,'TraceClose')
         end if
         return
      end if
   end if
   if cbx_objectcreate.checked then 
      le_errorreturn = &
         TraceEnableActivity( ActObjectCreate! )
      if le_errorreturn <> Success! then
         of_errmsg(le_errorreturn, &
            'TraceEnableActivity( ActObject! )')
         Traceclose()
         if le_errorreturn <> Success! then
            of_errmsg(le_errorreturn,'TraceClose')
         end if
         return
      end if
      le_errorreturn = &
         TraceEnableActivity( ActObjectDestroy! )
      if le_errorreturn <> Success! then
         of_errmsg(le_errorreturn, &
           'TraceEnableActivity(ActObjectDestroy!)')
         Traceclose()
         if le_errorreturn <> Success! then
            of_errmsg(le_errorreturn,'TraceClose')
         end if
         return
      end if
   end if

   if cbx_garbagecoll.checked then 
      le_errorreturn = &
         TraceEnableActivity( ActGarbageCollect! )
      if le_errorreturn <> Success! then
         of_errmsg(le_errorreturn, &
          'TraceEnableActivity(ActGarbageCollect! )')
         Traceclose()
         if le_errorreturn <> Success! then
            of_errmsg(le_errorreturn,'TraceClose')
         end if
         return
      end if
   end if

   // Start tracing
   le_errorreturn =TraceBegin( sle_tracelabel.text )
   if le_errorreturn <> Success! then
      of_errmsg(le_errorreturn,'TraceBegin')
      return
   end if
   
   // Change the title of the window and the 
   // text of the Start Trace button
   parent.title = is_title + '(Tracing)'
   this.text = 'Stop &Tracing'

// If the button label is Stop Trace, stop tracing
// and close the trace file
else
   le_errorreturn =TraceEnd()
   if le_errorreturn <> Success! then
      of_errmsg(le_errorreturn,'TraceEnd')
      return
   end if

   le_errorreturn =TraceClose()
   if le_errorreturn <> Success! then
      of_errmsg(le_errorreturn,'TraceClose')
   end if
   this.text = is_starttext
   parent.title = is_title 
end if

of_errmsg function

The window uses two functions to handle error messages. The of_errmsg function displays a message box:

// of_errmsg
Messagebox( this.title,'Error executing '+ as_msg + &
   '. Error code : '+ of_converterror(ae_error) )

of_converterror function

The of_converterror function converts the ErrorReturn parameter to a string:

// of_converterror: convert enumerated type 
// ErrorReturn parameter to text.
String ls_result
choose case a_error
   Case Success!
      ls_result =  "Success!"
   Case FileCloseError!
      ls_result =  "FileCloseError!"
   Case FileOpenError!
      ls_result =  "FileOpenError!"
   Case FileReadError!
      ls_result =  "FileReadError!"
   Case FileWriteError!
      ls_result =  "FileWriteError!"
   Case FileNotOpenError!
      ls_result =  "FileNotOpenError!"
   Case FileAlreadyOpenError!
      ls_result =  "FileAlreadyOpenError!"
   Case FileInvalidFormatError!
      ls_result =  "FileInvalidFormatError!"
   Case FileNotSetError!
      ls_result =  "FileNotSetError!"
   Case EventNotExistError!
      ls_result =  "EventNotExistError!"
   Case EventWrongPrototypeError!
      ls_result =  "EventWrongPrototypeError!"
   Case ModelNotExistsError!
      ls_result =  "ModelNotExistsError!"
   Case ModelExistsError!
      ls_result =  "ModelExistsError!"
   Case TraceStartedError!
      ls_result =  "TraceStartedError!"
   Case TraceNotStartedError!
      ls_result =  "TraceNotStartedError!"
   Case TraceNoMoreNodes!
      ls_result =  "TraceNoMoreNodes!"
   Case TraceGeneralError!
      ls_result =  "TraceGeneralError!"
   Case FeatureNotSupportedError!
      ls_result =  "FeatureNotSupportedError!"
   Case else
      ls_result =  "Unknown Error Code"
end choose
return ls_result

Collecting trace information using PowerScript functions

You use the PowerScript system functions listed in the following table to collect information in a trace file. Each of these functions returns a value of type ErrorReturn, an enumerated datatype.

Use this PowerScript function	To do this
TraceOpen	Open a named trace file and set the timer kind.
TraceEnableActivity	Enable logging of the specified activity.
TraceBegin	Start logging all enabled activities. You can pass an optional label for the trace block.
TraceError	Log a severity level and error message to the trace file.
TraceUser	Log a reference number and informational message to the trace file.
TraceEnd	Stop logging all enabled activities.
TraceDisableActivity	Disable logging of the specified activity.
TraceClose	Close the open trace file.

In general, you call the functions in the order shown in the table. That is, you must call TraceOpen before you call any other trace functions. You call TraceClose when you have finished tracing.

TraceEnableActivity and TraceDisableActivity can be called only when a trace file is open but tracing has not begun or has stopped—that is, before you call TraceBegin or after you call TraceEnd.

TraceUser and TraceError can be called only when the trace file is open and tracing is active—that is, after you call TraceBegin and before you call TraceEnd.

About TraceUser and TraceError

You can use TraceUser to record specific events in the trace file, such as the beginning and end of a body of code. You can also record the execution of a statement you never expected to reach, such as the DEFAULT statement in a CHOOSE CASE block. TraceError works just like TraceUser, but you can use it to signal more severe problems.

Both TraceUser and TraceError take a number and text string as arguments. You can use a simple text string that states what activity occurred, or you can build a string that provides more diagnostic information by including some context, such as the current values of variables. Run the application with only ActUser! or ActError! tracing turned on and then use the Profiling Trace View to pinpoint problems quickly.

Example: trace data collection

In this example, the user selects a timer kind from a drop-down list and enters a name for the trace file in a single-line edit box. Typically you would use the ErrorReturn return value from every trace call to return an error message if the call fails. For brevity, the example shows this only for the TraceOpen call.

Several trace activities are disabled for a second trace block. The activities that are not specifically disabled remain enabled until TraceClose is called.

ErrorReturn le_err
integer li_key
TimerKind ltk_kind

CHOOSE CASE ddlb_timerkind.Text
   CASE "None"
      ltk_kind = TimerNone!
   CASE "Clock"
      ltk_kind = Clock!
   CASE "Process"
      ltk_kind = Process!
   CASE "Thread"
      ltk_kind = Thread!
END CHOOSE

// Open the trace file and return an error message
// if the open fails
le_err = TraceOpen( sle_fileName.Text, ltk_kind )
IF le_err <> Success! THEN &
   of_errmsg(le_err, 'TraceOpen failed')
   RETURN
END IF

// Enable trace activities. Enabling ActLine!
// enables ActRoutine! implicitly
TraceEnableActivity(ActESQL!)
TraceEnableActivity(ActUser!)
TraceEnableActivity(ActError!)
TraceEnableActivity(ActLine!)
TraceEnableActivity(ActObjectCreate!)
TraceEnableActivity(ActObjectDestroy!)
TraceEnableActivity(ActGarbageCollect!)

TraceBegin("Trace_block_1")
// first block of code to be traced
// this block has the label Trace_block_1
…

TraceEnd()

// disable trace activities not needed for
// second block
TraceDisableActivity(ActLine! )
TraceDisableActivity(ActObjectCreate!)
TraceDisableActivity(ActObjectDestroy!)
TraceDisableActivity(ActGarbageCollect!)

TraceBegin("Trace_block_2")
// second block of code to be traced
…

TraceEnd()
TraceClose()

Prev	Up	Next
About tracing and profiling an application	Home	Analyzing trace information using profiling tools

Users GuideTracing and Profiling Applications